News

A typical cryogenic deflashing machine consists of a stainless-steel cabinet insulated with dense polyurethane foam. Located inside the cabinet are the blast chamber, the liquid nitrogen nozzle, and the opening for the throw wheel.
Plastic shots ranging size from 0.3 to 2.0mm are deployed. These shots do not cause rust or part contamination and sucked by machine inner high negative pressure, and then to be blasted by high speed wheel. All major components of the machine (motors, valves, controllers, etc.) are located outside of the cabinet and isolated from the temperature variations and moisture. These are maintenance-friendly design and reduce component failure in your machine.
In your machine, there must be room within the components barrel for the parts to tumble because it is the tumbling action that exposes the parts to both the Nitrogen and the media stream. The actual size of the barrel should be at least twice the size of your load.
As the Manufacturer of cryogenic de-flashing machines, we offer you options such as various capacity choices, programmable controllers with numerous deburring “recipes” for automatic operation, message centers, reporting, historical data etc.